MIL-DTL-19264C (OS)
shall be submitted in accordance with 4.4.1. All future production lots shall be of the same basic
granulation.
4.3.4 Failure. Failure of the sample to meet the requirements of this specification shall be cause for
rejection of the first article sample.
Quality conformance inspection. Quality conformance inspection shall consist of the
4.4
examinations and tests of 4.6 to determine conformance to the requirements of this specification. Failure
of any sample to conform to any requirement specified herein shall be cause for rejection of the lot
represented. Alternate methods and test procedures may be used provided prior written approval has been
obtained from the procuring activity and the technically cognizant personnel at the following address:
Department of the Navy, Naval Surface Warfare Center, Indian Head Division, ATTN: Gun Propelling
Charge Design Agent (Code E14), 3767 Strauss Avenue, Suite 201, Indian Head, MD 20640-5150.
Requirements and their corresponding tests are summarized in Table II.
4.4.1 Lot size. Unless otherwise specified in the contract or purchase order, the propellant shall be
produced in lots of not less than 100,000 pounds mass nor greater than 500,000 pounds mass.
4.4.2 Sampling. The samples shall be selected from the full propellant packing containers (6.7.1) so as
to be representative of the lot. All samples shall be selected following the final packing of the lot. All
samples shall be packed in moisture-proof airtight containers and marked with the following in
accordance with MIL-STD-129.
a.
Propellant description
b.
Propellant lot number
c.
Number of pounds in lot
d.
Manufacturer
e.
Contract number
4.4.2.1 For gun performance tests. Sample size shall be approximately 2,420 pounds mass randomly
selected from full propellant packing containers (6.7.1).
4.4.2.2 For physical characteristic tests. A 10 pounds mass sample shall be randomly selected from
full propellant packing containers (6.7.1).
4.4.2.3 For surveillance tests. A 5 pounds mass sample shall be randomly selected from the full
propellant packing containers (6.7.1) and forwarded to the Navy's designated surveillance activity for
propellants specified in the acquisition documentation (6.2).
Classification of characteristics. The characteristics verified by the tests and examinations
4.5
herein are classified as critical, major or minor in accordance with DOD-STD-2101. Requirements for
critical characteristics are identified by the symbol (C) and major characteristics by the symbol (M). The
number following the classification symbol indicates the serial number of the characteristic.
Requirements not annotated with a classification code are classified minor.
4.6
Methods of inspection.
CAUTION
This specification covers sampling and testing of chemical, toxic, or
explosive materials, which are hazardous to personnel.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business