MIL-DTL-398D
4.5.2.1 RDX (cyclotrimethylenetrinitramine).
(Classification of
Characteristics)
Conformance
Requirement
Inspection
Criteria
Paragraph
Method
Reference
Critical
None defined
Major
101
Melting point determination
4.6.1
3.2
4.7.1
102
Insoluble particles
4.6.1
3.2
4.7.2
103
Acetone insoluble material
4.6.1
3.2
4.7.3
104
Inorganic insoluble material
4.6.1
3.2
4.7.4
105
Acidity determination
4.6.1
3.2
4.7.5
106
Granulation determination
4.6.1
3.3
4.7.6
107
HMX content
4.6.1
3.2
4.7.7
108
Impact sensitivity
4.6.1
3.2
4.7.8
Minor
201 Workmanship
4.6.1
3.5
4.7.9
4.6
Sampling and inspection equipment.
Hazard Notice
The materials described herein are flammable or explosive or
both. Consequently, they present hazards in manufacture,
handling, storage and shipment. The contractor should recognize
these hazards and take appropriate measures to guard and protect
against fire, explosion, adverse environment, corrosive
atmosphere, rough handling and electrically-induced incidents.
4.6.1 Sampling. The tests depicted in paragraphs 4.7.1
through 4.7.9 shall be performed on an approximate twelve (12)
ounce sample representative of the batch and taken in accordance
with ASTM Procedure E300-70 for solids. The selection of batches
for inspection sampling and testing shall be in accordance with
MIL-STD-1235, CSP-1, Plan, Sample Frequency Code Letter B, AQL
6.5%. If any sample fails to meet any test requirement, the
batch represented by the sample shall be rejected. All batches
produced between the time that the last batch was tested and
accepted and the batch which failed shall be tested in accordance
with the applicable methods given in paragraph 4.7. If any of
these batches fail to meet any of the test requirements, that
batch shall also be rejected. In addition, after any failure of
a batch the contractor will return to 100% inspection until "i"
successive batches are accepted as required by MIL-STD-1235. The
classification shall be as given in Table 4.5.2.1.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business