MIL-DTL-14970D
4.5
Conformance inspection.
4.5.1 Inspection lot formation. A lot shall consist of one
or more batches of Composition A-5 produced by one
manufacturer, in accordance with the same specification, or
specification revision, under one continuous set of operating
conditions. Each batch shall consist of that quantity of
Composition A-5 that has been subjected to the same unit
chemical or physical mixing process intended to make the final
product homogeneous. In addition, each lot shall contain:
a.
RDX from one manufacturer only.
b.
Stearic acid from one manufacturer only.
Units of product selected for inspection shall represent only
the inspection lot from which they are drawn and shall not be
construed to represent any prior or subsequent quantities
presented for inspection. Homogeneity shall be considered to
exist provided the lot meets the above homogeneity criteria.
All material submitted for inspection in accordance with this
specification shall comply with the homogeneity criteria
specified herein, regardless of the type of inspection
procedure which is being applied to determine conformance with
requirements. The lot shall be submitted for inspection in
accordance with MIL-STD-1916 when applicable. The criteria and
procedures for the assignment of lot numbers shall be in
accordance with MIL-STD-1168
4.5.2
Examinations and tests.
a. Classification characteristics. Conformance
examinations and tests are specified in the following
classification of characteristics paragraphs. The
contractor's quality program or detailed inspection system
shall provide assurance of compliance of all characteristics
with the applicable drawing and specification requirements
utilizing as a minimum the conformance criteria specified.
When cited in this specification (4.5.2.2 to 4.5.2.6),
attributes sampling inspection shall be conducted in
accordance with Table III below, using the inspection levels
stated in the classification of characteristics paragraphs.
(See MIL-STD-1916 for the definitions of critical, major and
minor classification of characteristics.)
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business