MIL-DTL-14970D
ANSI/ISO/ASQC A8402-1994 -
Quality Management and
Quality Assurance
Vocabulary
(Application for copies should be addressed to American
Society for Quality Control, 611 East Wisconsin Ave,
Milwaukee, WI 53202.)
2.4 Order of precedence. In the event of a conflict
between the text of this document and the references cited
herein, the text of this document takes precedence. Nothing
in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 First article. When specified in the contract or
purchase order (see 6.2), a sample shall be subjected to
first article inspection in accordance with the technical
provisions herein (see 4.4).
3.2
Material.
3.2.1 Composition A-5. Composition A-5 shall consist
of Type II RDX, Class 1, (or Class 1 nominal) complying with
the requirements of MIL-DTL-398 for RDX and Stearic Acid
complying with the requirements of MIL-S-271. The
composition shall be made by the wet slurry method by
coating the RDX with stearic acid dissolved in cyclohexanone
(see 6.8).
3.2.1.1 Limitation on the use of recycled RDX in
feedstock for Composition A-5, Class 1. Composition A-5,
Class 1 may be produced using RDX which has been
recrystallized from a feedstock consisting of a maximum of
50 percent (%) by weight of recycled RDX from the RDX acid
removal process only (see 6.12.2) and a minimum of 50% by
weight of virgin RDX (see 6.12.1). The RDX shall meet all
the requirements of MIL-DTL-398.
3.2.2 Chemical and physical tests. Unless otherwise
specified in the contract or purchase order, Composition A-5
shall conform to the requirements specified in Table I when
tested as specified by the applicable test methods.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business