MIL-DTL-46225D
3.5.3 Solubility in water. The solubility of the lead azide in water shall not be greater than
1.0 percent.
3.5.4 Matter insoluble in nitric acid. The insoluble matter of the lead azide in nitric acid
shall not be greater than 0.05 percent.
3.5.5 Iron and copper. There shall be no more than 3 parts per million (ppm) of iron and
no more than 3 ppm of copper present in the prepared test solutions.
3.5.6 Chlorides, nitrates and acetates. There shall be no more than 4 ppm of chlorides, 15
ppm of nitrates and 72 ppm of acetates in the prepared test solutions.
3.5.7 Lead carboxymethyl cellulose. The carboxymethyl cellulose when determined as
the lead salt shall be 0.50 percent min. and 1.20 percent maximum (max).
3.6 Bulk density. The bulk density shall be 1.0 gram (g) per milliLiter (mL) min.
3.7 Workmanship. The lead azide shall be free from grease, wood slivers or chips, rubber
or plastic particles or any other foreign particles (see 6.8).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business