MIL-DTL-45444C
4.5.2.1
Classification of characteristics - HMX
Classif-
Examination/test
Conformance
Requirement
Inspection
ication
criteria
paragraph
method ref.
Critical
None defined
Major
101
Alpha HMX content
4.6
3.2
4.7.1
102
HMX content
4.6
3.2
4.7.1
103
RDX content
4.6
3.2
4.7.1
104
Melting point
4.6
3.2
4.7.2
105
Insoluble particle
4.6
3.2
4.7.3
106
Acetone insoluble
4.6
3.2
4.7.4
material
107
Inorganic insoluble
4.6
3.2
4.7.5
108
Acidity
4.6
3.2
4.7.6
109
Impact sensitivity
4.6
3.2
4.7.7
110
Granulation
4.6
3.2.1
4.7.8
111
Workmanship
4.6
3.4
4.7.9
Minor
None defined
4.6
Sampling and inspection equipment.
Hazard Notice
The materials described herein are flammable or explosive or
both. Consequently, they present hazards in manufacture,
handling, storage and shipment. The contractor should recognize
these hazards and take appropriate measures to guard and protect
against fire, explosion, adverse environment, corrosive
atmosphere, rough handling and electrically-induced incidents.
4.6.1 Sampling. A representative sample of approximately
300 grams shall be taken from each batch of HMX in accordance
with ASTM Procedure E300 for solids. Samples shall be chosen in
accordance with MIL-STD-1235, CSP-1 Plan, Inspection Level II,
AQL 4.0%. (AQL are provided as indices to simplify the use of
the table in MIL-STD-1235, but have no other meaning relative to
the sampling plan.) The samples shall be tested for compliance
with requirements of 3.2, Table I of this specification. If any
sample fails to meet any test requirement the batch represented
by the sample shall be rejected. All batches produced between
the time that the last batch was tested and accepted and the
batch which failed shall be tested in accordance with the
applicable methods given in paragraph 4.7. If any of these
batches fail to meet any of the test requirements, that batch
shall also be rejected. In addition, after any failure of a
batch the contractor will return to 100 % inspection until "i"
successive batches are accepted as required by MIL-STD-1235.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business