INCH-POUND
MIL-DTL-60318C (AR)
21 October 2003
SUPERSEDING
MIL-P-60318B (PA)
2 April 1974
DETAIL SPECIFICATION
PROPELLANT, M1
FOR USE IN CHARGE, PROPELLING, M67
FOR 105MM HOWITZER
This specification is approved for use by the U.S. Army and is available for use
by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers M1 Propellant for one type of propelling
charge designated as M67 for the 105MM Howitzer, M2A2.
1.2 Classification.
The propellant will be of the following types as specified:
Type I - Cylindrical Multi-perforated Grains
Type II - Cylindrical Single-perforated Grains
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in
sections 3 and 4 of this specification. This section does not include documents in
other sections of this specification or recommended for additional information or
as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all requirements documents
cited in sections 3 and 4 of this specification, whether or not they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data
which may be of use to improving this document should be addressed to: Commander,
U.S. Army ARDEC, ATTN: AMSTA-AR-QAW-E, Picatinny Arsenal, New Jersey
07806-5000 by using the Standardization Document Improvement Proposal (DD Form
1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 1376
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business