INCH - POUNDS
MIL-DTL-757C
5 March 2012
SUPERSEDING
MIL-L-00757B
16 May 1994
MIL-L-757A
01 September 1967
DETAIL SPECIFICATION
LEAD STYPHNATE, NORMAL
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements and quality assurance provisions
for the manufacture and acceptance of Normal Lead Styphnate for use in primer compositions
(Section 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3 and 4 of this specification, whether or
not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document shall be addressed to: Commander,
US Army ARDEC, Attn: RDAR-QES-E, Picatinny Arsenal, New Jersey 07806-5000 or
emailed to ardecstdzn@conus.army.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST online database at
AMSC N/A
FSC 1376
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business