DOD-STD-1469 - Ballistic Acceptance Test Requirements For Solid Propellant For Cannon
This standard covers methods of ballistic acceptance testing.
JAN-C-801 - Cellulose Nitrate Plastic (Pyroxylin), Rods (For Use In Ammunition)
JAN-D-552 - Diazodinitrophenol (Tabular)
This specification covers one grade of Tabular Diazodinitrophenol.
JAN-D-709 - Dimethylphthalate (For Use In Explosives)
This specification covers dimethylphthalate for use in the manufacture of propellent powder.
JAN-P-309 - Power, Propellant, Cannon M1, M6, And M14 (S/S By Mil-Std 652)
JAN-P-362 - Powder, Black, Sodium-Nitrate
JAN-P-408 - (
Images) Pentolite, 50/50
JAN-P-715 - Powder, Propellant M10 (S/S By Mil-Std-652)
MIL-A-166 - Ammonium Picrate (Explosive D)
This specification covers one type of Ammonium Picrate (Explosive D) intended for use in ammunition.
MIL-A-50210 - Acid, Mixed (For Use In Nitration Of Explosives)(No S/S Document)
This Military Specification covers mixed acid consisting primarily of sulfuric acid and nitric acid in productions required for a particular nitrating process.
MIL-A-50926 - Adhesive Mr-23 (For Use In Ammunition)
This specification covers one type of adhesive MR-23 for use as an adhesive in non-metallic cartridge cases.
MIL-B-48177 - Barium Sulfate
This specification covers one type of barium sulfate (Barytes) for use in the formulation of ammunition inert fillers.
MIL-B-48387 - Ball Powder, Igniter (Bpi) (Spheroidal Propellant Igniter (Spi))
This specification covers one type of igniter ball powder for use in ammunition.
MIL-C-00401 - Composition B
MIL-C-13609 - Casting Solvents For 010, Ogk And Ahh Propellants
This specification covers three types of casting solvents for use in the manufacture of propellants. The casting solvent shall be of the following types as specified: Type I - Casting Solvent, OGK Type II - Casting Solvent, 0I0 Type III - Casting Solvent, AHH
MIL-C-20301 - Cellulose Acetate For Use In Propellant Powder
MIL-C-206 - Cellulose, Cotton (For Use In Explosives)
This specification covers the requirements for cotton cellulose to be used in the manufacture of explosives.
MIL-C-21723 - Composition Ch-6
This specification establishes the requirements for an explosive designated as Composition CH-6.
MIL-C-401 - Composition B
This specification covers two types of high explosive designated as Composition B for use in ammunition.
MIL-C-427 - Composition C-3
This specification covers one grade of Composition C-3 for use in explosive compositions.
MIL-C-440 - Compositions A-3 And A-4
This specification covers two high explosives for use in ammunition.
MIL-C-45010 - Composition C-4
This specification covers three classes of composition C-4, a military plastic explosive.
MIL-C-45113 - Composition B-3
This specification covers the requirements and quality assurance provisions for the manufacture and acceptance of one type of Composition B-3 for use as a main charge explosive (see 6.1).
MIL-C-46652 - Composition B4
This specification covers one type of high explosive designated as Composition B4 for use in Ammunition.
MIL-C-48061 - Cellulose Nitrate, Plastic Sheets
This specification covers cellulose nitrate plastic sheets for propellant increment containers.
MIL-C-48141 - Composition, Tungsten, Delay
This specification covers one type of tungsten delay composition for use in the loading of time fuzes (see 6.3).
MIL-C-50404 - Clay (For Use In Ammunition)
MIL-C-63217 - Composition A-3, Type Ii (With Polyethylene)
This specification covers an explosive composition of RDX coated with polyethylene (see 6.1) which is designated as Composition A-3, Type II.
MIL-D-13383 - Di-(2-Ethylhexyl)-Adipate
This specification covers one type of di-(2-ethylhexyl)-adipate for use in polyisobutylene binder, used in explosive compositions.
MIL-D-63260 - Demolition Kit, Blasting: Xm268 (Blasting Agent)
This specification covers a two component military slurry blasting agent (see 6.1), which is activated by mixing two parts of the liquid component with one part of the solid component.
MIL-D-82710 - Delay Composition, Tungsten Fluorocarbon Copolymer
This specification covers one type of Tungsten-Fluorocarbon copolymer delay composition.
MIL-D-82885 - Diazodinitrophenol
This specification establishes the requirements and quality assurance provisions for the manufacture and acceptance of one type of diazodinitrophenol commonly referred to as dinol, diazol, or DDNP.
MIL-DTL-14970 - Explosive Composition A-5
This specification covers requirements, tests for an explosive designated as Explosive Composition A-5.
MIL-DTL-18164 - Composition D-2
This specification covers a composition used to emulsify and densensitize explosives.
MIL-DTL-19264 - Propellant, Bs-Naco, For The Mk 65 Clearing Charge And Mk 67 Propelling Charge
This specification covers the minimum requirements for BS-NACO Propellant for use in the MK 65 clearing charge and the MK 67 propelling charge (see 6.1).
MIL-DTL-248 - Trinitrotoluene (Tnt)
TNT covered by this specification is a high explosive intended for use in ammunition (see 6. 1).
MIL-DTL-3984 - Propellants For Small Arms Ammunition
This specification covers the requirements and verification methods for propellant for use in small arms ammunition.
MIL-DTL-398 - Rdx (Cyclotrimethylenetrinitramine)
This specification covers the requirements, examinations and tests for two types of RDX for use in explosive compositions as follows: (see 6.1).
MIL-DTL-45444 - Hmx (Cyclotetramethylenetetranitramine)
This specification covers requirements, examinations and test for two grades of HMX for use in explosive compositions.
MIL-DTL-46225 - Lead Azide Rd-1333
This specification covers lead azide RD-1333 for use in the loading of detonators,blasting caps, percussions primers, and fuzes, and in the manufacture of priming compositions.
MIL-DTL-60318 - Propellant, M1 For Use In Charge, Propelling, M67 For 105Mm Howitzer
This specification covers M1 Propellant for one type of propelling charge designated as M67 for the 105MM Howitzer, M2A2.
MIL-DTL-757 - Lead Styphnate, Normal
This specification covers the requirements and quality assurance provisions for the manufacture and acceptance of Normal Lead Styphnate for use in primer compositions (Section 6.1).
MIL-DTL-82874 - Explosive, Plastic-Bonded, Pressed, Pbxn-7
This specification establishes the requirements for a plastic-bonded, pressed explosive composition designated as "PBXN-7".
MIL-DTL-82875 - Explosive, Plastic-Bonded, Pressed, Pbxn-9
This specification establishes the requirements for a plastic-bonded, pressed explosive, PBXN-9, for use in ordnance.
MIL-DTL-82886 - Explosive, Plastic-Bonded, Cast Pbxn-109
This specification establishes the requirements for the procurement of one type of cast plastic-bonded explosive, PBXN-109 (see 6.1)
MIL-DTL-82896 - Explosive, Plastic-Bonded, Cast, Pbxn-107
This specification establishes the requirements for an elastomer-bonded, cast explosive referred to herein as "PBXN-107, Type I", "PBXN-107, Type II", or "PBXN-107, Type III".
MIL-DTL-82897 - Explosive Material, Coated; Cxm-3
This specification establishes the requirements for one type of coated explosive material, referred to herein as "CXM-3".
MIL-DTL-82901 - Explosive, Plastic-Bonded, Cast Pbxn-110
This specification covers the requirements for two types of cast PBXN-110 plastic-bonded explosive (see 6.1).
MIL-DTL-82907 - Explosive Material, Coated Cxm-7
This specification establishes the requirements for the procurement of a coated explosive material, referred to herein as CXM-7. The material is a blend of RDX coated with di-(2-ethylhexyl)adipate (DOA).
MIL-DTL-82919 - Explosive, Plastic-Bonded, Cast Pbxn-112
This specification covers a high energy castable explosive, composed of cyclotetramethylenetetranitramine (HMX) and an elastomeric binder. The plastic-bonded explosive is referred to herein as PBXN-112 (see 6.1).
MIL-E-22267 - ( Images) Explosive Composition, Hbx Type
This specification covers three explosive compositions of the HBX type. These are: HBX-1, HBX-3 and H-6.
MIL-E-48225 - ( Images) Ethylene Glycol Dinitrate (Egdn)
This specification covers one type of Ethylene Glycol Dinitrate (EGDN) for use in the formulation of propellants (see 6.4).
MIL-E-81111 - ( Images) Explosive, Plastic-Bonded Molding Powder (Pbxn-5)
This specification covers a dimensionally stable, high strength, explosive composed of cyclotetramethylenetetranitramine (HMX) and a copolymer of vinylidene fluoride and hexafluoropropylene. The plastic-bonded explosive is referred to herein as "PBXN-5".
MIL-E-82668 - Explosives, Cyclotol, 25/75 And 29/71, Rdx/Tnt
This specification covers two types of cyclotol explosive referenced herein as the "explosive".
MIL-E-82732 - Explosives, Destex
This specification covers one type of explosive, designated as "DESTEX" (see 6.1).
MIL-E-82738 - Explosive, Plastic Bonded Molding Powder (Pbxn-3)
This specification covers a dimensionally stable, high strength, explosive composed of cyclotetramethylenetetranitramine (HMX) and nylon. The plastic-bonded explosive is referred to herein as "PBXN-3".
MIL-E-82740 - Explosive, Plastic-Bonded, Injection Moldable (Pbxn-301)
This specification covers an injection moldable plastic-bonded explosive composed of pentaerythritol tetranitrate (PETN) and silicone resin. The plastic-bonded explosive is referred to herein as "PBXN-301."
MIL-E-82746 - Explosive, Plastic-Bonded Extrudable Powder, Pbxn-202
This specification covers the requirements for the manufacture and acceptance of one type of plastic-bonded, extrudable explosive material, referred to herein as PBXN-202.
MIL-E-82756 - Explosive, Plastic-Bonded, Cast Pbxn-103
This specification establishes the minimum requirements for procurement of one type of plastic-bonded explosive, cast PBXN-103, for use in ordnance.
MIL-E-82895 - Explosive Material, Coated; Cxm-9
This specification covers one type of coated explosive material, referred to herein as CXM-9. The material is a blend of cyclotetramethylenetetranitramine (HMX), Grade B, Classes 1, 3, and 5, coated with lauryl methacrylate (LMA) and lecithin.
MIL-E-82898 - Explosive, Plastic-Bonded, Cast, Pbx(Af)-108
This specification establishes the requirements for one type of cast plastic-bonded explosive designated as "PBX(AF)-108".
MIL-E-82902 - Explosive, Plastic-Bonded, Cast Pbxn-111
This specification covers the requirements for the procurement of one type of cast, plastic-bonded explosive, PBXN-111, for use in ordnance.
MIL-E-82903 - ( Images) Explosives, Hns-Iv And Hns-V
This specification establishes the requirements for the procurement of the organic compound 2,2', 4,4', 6,6' - Hexanitrostilbene, HNS-IV, which is known as small particle HNS explosive and is characterized by high thermal stability.
MIL-E-82908 - Explosive Material, Coated, Cxm-8
This specification establishes the requirements for a plastic-bonded, pressed explosive composition designated as "CXM-8." The material is a blend of RDX, Type II, Classes 1 and 5, coated with isodecyl petargonate (IDP).
MIL-E-82915 - Explosive Material, Coated; Cxm-6
This specification covers one type of coated explosive material, referred to herein as CXM-6.
A-A-3011)The slip-on cotton-yarn dusting mop covered by this specification is primarily intended for use in dusting floors.
T-M-580 - Mop, Wet, Cotton, (With Fixed Handle) (S/S By A-A-3060)
T-S-837 - Swab, Deck, (With Or Without Handle) (S/S By Fed Spec T-M-580)
UU-T-595 - Towel, Wiping, Paper. Industrial And Institutional (S/S By A-A-1432)
UU-T-598 - Towel, Paper. (Plastic-Wiping) (S/S By A-A-1447)
MIL-E-82917 - Explosive, Plastic-Bonded, Cast, Pbxn-105
This specification establishes the requirements for an elastomer-bonded, cast explosive referred to herein as "PBXN-105."
MIL-E-82918 - Explosive, Plastic-Bonded, Cast, Pbxn-106
This specification establishes the requirements for an elastomer-bonded, cast explosive, referred to herein as "PBXN-106".
MIL-G-155 - Graphite, Dry (For Use In Ammunition)
This specification covers four grades of graphite for use in ammunition.
MIL-G-21352 - Guanidine Nitrate
MIL-H-48269 - Hmx/Kel-F Resin Molding Power (For Use In Ammunition)
This specification covers a high-energy solid explosive composed of cyclotetramethylenetetranitramine (HMX) and a polymer of trifluorochloroethylene, which acts as a binder for the HMX (see 6.3).
MIL-H-48358 - Hmx/Resin Explosive Composition Lx-14-0 (For Use In Ammunition)
This specification covers a high energy solid explosive composed of HMX, uniformly coated with a Polyurethane elastomer.
MIL-H-50589 - H M X For 30Mm Ammunition
This specification covers two types of explosive designated as Explosive, HMX, PL Number I and Explosive, HMX, PL Number II.
MIL-I-14955 - Ignition, Pellets
MIL-I-14961 - Increments, Propellant M1A1, M2A1, M3A1, M181 And M182 (Made From Propellant, M8)
This specification covers five propellant increments made from M8 propellant for use in mortar ammunition.
MIL-I-48086 - Increments, Propellant For Charge, Propellant, M36A2 (Made From Propellant M8)
This specification covers propellant increments made from M8 Propellant for use in Charge, Propelling, M36A2 for 4.2 Inch Ammunition.
MIL-I-60016 - Increments, Propellant For Charge, Propelling, M36A1 (Made From Propellant, M8)
This specification covers propellant increments made from M8 Propellant for use in charge, propelling M36A1 for 4.2 Inch Mortar Cannon M30.
MIL-L-00757 - Lead Styphnate, Normal
This specification covers the requirements and quality assurance provisions for the manufacture and acceptance of normal lead styphnate for use in primer compositions (Section 6.1).
MIL-L-14161 - Loading With Hbx Compositions
This specification covers the loading of bursters, bombs, rocket heads, and warheads with HBX-1, HBX-3, or HBX-6.
MIL-L-16355 - Lead Styphnate, Basic
This specification covers the requirements and quality assurance provisions for the manufacture and acceptance of two types of basic lead styphnate for use in explosive priming compositions. (See 6.1))
MIL-L-20336 - Loading, Assembling And Packing Of High Explosive Shell With Cast Trinitrotoluene (Tnt), And Cast Composition B
MIL-L-3055 - Lead Azide
This specification covers the requirements and quality assurance provisions for the manufacture and acceptance of two types of lead azide for use as a primary explosive (see 6.1).
MIL-L-45198 - Loading Of High Explosive Antitank Shell With Composition B
MIL-L-46496 - Lead Mononitroresorcinate (Lmnr)
This specification covers lead mononitroresorcinate for use in detonators, fuzes, and priming compositions.
MIL-L-757 - Lead Styphnate, Normal
MIL-M-14745 - Minol 2 Composition
This Military Specification covers Minol-2 Composition for use in Bombs.
MIL-N-00494 - Nitroguanidine
This specification covers nitroguanidine (NQ) for use in propellants.
MIL-N-246 - Nitroglycerin
This specification covers two types of nitroglycerin for use in propellants.
MIL-N-46924 - Nitrocellulose Paper
MIL-N-494 - Nitroguanidine (Picrite)
This specification covers nitro-guanidine for use in the manufacture of propellants.
MIL-N-82881 - Nitrostarch
This specification establishes the requirements and quality assurance provisions for a wet nitrostarch for the base charges of small explosive devices.
MIL-O-45445 - Octol
This specification covers Octol, a high explosive intended for use as a high explosive mixture in ammunition (see 6.1).
MIL-O-60371 - Oxamide Explosive Composition
This specification covers a high explosive composition designated as Oxamide Explosive intended for use in a bursting charge.
MIL-P-00223 - Powder, Black
This specification covers the design, fabrication, testing, packaging, and use of special purpose boxes for the protection and stowage or storage of supply support items (see 6.5. 2) for mechanical, electrical and electronic systems and equipments.
MIL-P-13822 - Polyisobutylene/Oil Gel
This specification covers polyisobutylene/oil gel intended for use as a component of Military dynamite.
MIL-P-14737 - Propellant, M7
This specification covers standard M7 rocket propellant for use in rockets and modified M7 rocket propellant for use in the LAW program.
MIL-P-14940 - Propellant M6 For Use In Charge Propelling, M119, 155Mm
This specification covers M6 Propellant for use in Propelling Charge M119A1 for M185 Cannon, SP M109A1 Howitzer, 155MM.
MIL-P-14999 - Powder, Molding Compound Explosive (Pbx)
This Military Specification covers two types of molding powder which are used to press pellets for use in ammunition.
MIL-P-16401 - Powder, Rocket Propellant Ballistite, Type N-4
MIL-P-17449 - Powder, Propellant, Cordite N
This specification covers propellant powder for Naval guns.
MIL-P-17646 - Powder, Propellant (For Ammunition, 20Mm(Aa) Gun)
This specification covers propellant powder for use in loading 20mm ammunition for the 20mm.70 Caliber Anti-Aircraft gun.
MIL-P-17959 - Powder, Propellant, Ballistics Of, For 3 Inch/50 Caliber Gun
This specification contains the methods and criteria for acceptance testing of 3 inch/50 caliber gun production powders with respect to ballistic properties.
MIL-P-18254 - Powder Propellant, Picrite, Cool
MIL-P-18334 - Powder, Propellant, Casting
MIL-P-18617 - Propellant, Double-Base, Type N-2 (Jpn)
MIL-P-18942 - Propellant For 20Mm Aircraft Gun Mark 12
This specification covers propellant suitable for use in loading ammunition for the 20 mm Aircraft Gun ,Mark 12.
MIL-P-20304 - Pentaerythritol
This specification covers one grade of pentaerythritol.
MIL-P-20306 - Powder, Ignition Cartridge, (M9), 60Mm And 81Mm Mortar
MIL-P-22314 - Propellants, U.S. Navy Guns; Ballistic Appendix
This specification covers the ballistic requirements for all propellant powders procured for use in U. S. Navy guns except aircraft guns.
MIL-P-223 - Powder, Black
This specification covers black powder intended for use in ammunition.
MIL-P-231 - Propellant, Pyrocellulose
This specification covers smokeless propellant intended for use as a propelling charge for cannon.
MIL-P-23625 - Pbxn-4 Explosive
This specification establishes the requirements for the procurement of the PBXN-4 Explosive, which is used in special applications. The PBXN-4 is of one type and one class.
MIL-P-387 - Pentaerythrite Tetranitrate (Petn)
1.1 Pentaerythrlte tetranitrate (PETN) covered by this specification is a high explosive intended for use in ammunition (see 6.1).
MIL-P-45446 - Powder, Molding, Pbx-9404
This specification covers one type of high explosive mixture designated as PBX-9494 Molding Powder.
MIL-P-46252 - Propellant, M1 For Use In 105Mm Cartridge, Hep-T, M393A2, Wp-T, M416, And Tp-T, M467
MIL-P-46458 - Propellant M30 For Use In Cartridge, 105Mm, Heat-T, M456A1 Heat-T-Mp, M456A1E2 (M456A2) And Tp-T, M490
This specification covers M30 Propellant for use in the Cartridge HEAT-T, M456A1, HEAT-T-MP, M456A1E2 and TP-T, M490 for the 105MM, M68 Gun.
MIL-P-46464 - Pellets, Tetryl
This specification covers two types of tetryl pellets for use in ammunition.
MIL-P-46484 - Propellant, M6, For Use In Cartridge, 76Mm, Heat Tm496
This specification covers M6 Propellant for use in the following Cartridges employed with the M32 or M48 gun: Cartridge, 76MM, HEAT-T, M496.
MIL-P-46522 - Propellant, M17, For Use In Cartridges, 76Mm, Ap-T, M339 & 76Mm, Tp-T, M340A1
This specification covers one type of propellant designated as M17, for use with cartridges, 76MM, AP-T M339 and 76MM, TP-T, M340A1.
MIL-P-46600 - Propellant M30 For Use In Cartridge Heat-T, M431A2 For 90Mm Guns
MIL-P-46650 - Propellant, M1, For Use In Charge Propelling, Xm84 For 105Mm
MIL-P-46651 - Propellant M30E1 For Use In Propelling Charge M85 And Mm121 For 105Mm Howitzer
MIL-P-46663 - Propellant, M2, For Cartridge, 37Mm, Tp, M63 Mod. 1
MIL-P-46683 - Propellant, M31(T34), For Use In Charge Propelling M45, For Projectiles M356 And M357, For 120Mm Gun, M58
MIL-P-46699 - Propellant, M1 For Use In Charge Propelling M2 (White Bag) For 8 Inch Howitzer
MIL-P-46902 - Propellant, T36E1, For Use In Charge, Propelling, 155Mm, M51
MIL-P-46913 - Propellant, M1, For Use In Charge Propelling, 155Mm, M3
MIL-P-46990 - Propellant, M1 For Use In Charge Propelling For 75Mm Howitzer M1A1 And M3
This specification covers the M1 propellant for one type of propelling charge for 75MM howitzer M1A1 and M3.
MIL-P-46993 - Propellant M26 (T28) For Use In Increment Xm90E1 For 81Mm Mortar
MIL-P-46999 - Propellant M30 For Use In Cartridges, Tp-T M353A1 And Ap-T M318A1E1 For 90Mm Guns
This specification covers M30 Propellant for use in cartridges M353A1 and M318A1E1 in 90MM guns, M36, M41 and M54.
MIL-P-48089 - Propellant, M5 (For Use In Special Applications)
This specification covers M5 Flake Propellant for use in propelling charges for special applications.
MIL-P-48099 - Propellant, M10 (For Use In Special Applications)
This specification covers M10 Propellant for use in the 155MM, M483A1 projectile and 8 inch, M509E1 projectile (see 6.3).
MIL-P-48130 - Propellant M10 For 81Mm Mortar M205 Propelling Charge
This specification covers M10 Propellant for use in M205 Mortar Increments for the following 81MM cartridges: HE, M374A3 and Smoke, WP, M375A3.
MIL-P-48154 - Propellant M1 For Use In Cartridge, 105Mm, Tpds-T, M724A1
This specification covers M1 Propellant for use in the M724A1 Cartridge employed with the 105MM, M68 Gun.
MIL-P-48333 - Propellant, Liquid
This specification covers a type of liquid propellant containing Ethylene Glycol Dinitrate and 1-Nitro-2-Propanol.
MIL-P-48335 - Propellant, Spheroidal Ball Powder
This specification covers spheroidal propellant for use in ammunition (see 6.3).
MIL-P-48349 - Propellant M30A1 For Use In 155Mm Propelling Charges
This specification covers M30A1 Propellant for use in Cartridges employed with the XM198 Cannon prior to DT/OT II Testing.
MIL-P-48357 - Propellant, Double-Base Sheet, M36
This specification covers a Double-Base Sheet Propellant, M36 referred to herein as the "propellant".
MIL-P-48372 - Propellant, M30A1 For Use In Charge, Proof, 155Mm, Pxr-6255
This specification covers M30A1 Propellant for use in one type of propelling charge designated as charge, proof, 155MM, PXR-6255, for 155MM Cannon M185 and M199.
MIL-P-48395 - Pellets, Explosive Compositions (For Use In Ammunition)
This specification covers explosive composition for eleven (11) types of pellets which contain explosives (i.e. HMX, RDX, etc.) in mixture with desensitizers (i.e. stearic acid, wax, etc.) with or without binders (i.e. graphite, polyisobutylene, plastics, etc.). Explosive compositions include but are not limited to the following: Composition A-3, Composition A-4, Composition A-5, CH-6, PBHMX, PBXN-5, etc.
MIL-P-50206 - Propellant M9, Flake (For Use In 40Mm Cartridges)
This specification covers M9 Flake Propellant for use in 40MM cartridges.
MIL-P-50418 - Propellant, M9 For Use In Increment, M185 For 81Mm Mortar
MIL-P-50425 - Propellant, M9 For Use In Increment, M5 For 81Mm Mortar
This specification covers one type of flake propellant designated as M9 for use in Increment M5 for Cartridges, 81MM, HE and TP, M362A1, and WP, M370.
MIL-P-50472 - Propellant M26A1, For Use In Change Propelling M189
This specification covers M26A1 Propellant for use in Charge Propelling M189 for 152MM Cartridge.
MIL-P-50486 - Potassium Dinitrohydroxy Hydrobenzofuroxan (For Use In Ammunition)
This specification covers one type of potassium 4, 6-Dinitro-7-hydrobenzofuroxan, and initiating explosive, intended for use in ammunition (see 6.4).
MIL-P-50854 - Plastic Bonded Hmx (95/5) Powder (For Use In Ammunition)
This specification covers an explosive designated as Plastic Bonded HMX (PBHMX).
MIL-P-50855 - Polyvinyl Acetate Aqueous Emulsion (Paae) (For Use In Ammunition)
This specification covers one type of polyvinyl acetate aqueous emulsion and an aqueous solution of chromic nitrate catalyst for use as a binder in non-metallic cartridge cases.
MIL-P-50900 - Pellet, Plastic Bonded Hmx (95/5) (For Use In Ammunition)
This specification covers explosive pellets designated as Plastic Bonded HMX (PBHMX).
MIL-P-50977 - Pellets (Pbx) For Use In Ammunition
This specification covers explosive pellets which are formed using a powdered explosive compound known as PBX.
MIL-P-528 - Power, Propellent (For Small Arms Ammunition, 20Mm (S/S By Mil-P-3984)
MIL-P-60019 - Propellant, M9 For Use With Charge, Propelling M36A1 For 4.2 Inch Mortar
This specification covers one type of flake propellant designated as M9 for use in charge, propelling M36A1 for the 4.2 inch mortar, M30.
MIL-P-60029 - Propellant M9 For Use In Increments M90 & M90A1 For 81Mm Mortar
This specification covers two types of flake propellant designated as M9 for use in charge A and B for the M90 and M90A1 increments for the following 81MM cartridges: M374, M374A2, M375 and M375A2.
MIL-P-60033 - Propellant, T36E1, For Use In Charge Propelling 155Mm, Xm119 (Supercharge)
This specification covers M30A1 propellant for one type of propelling change designated as 155MM Propelling Charge, M119 Supercharge, for Howitzer, S.P., M109.
MIL-P-60045 - Propellant M2 For Use In 165Mm Cartridges
This specification covers M2 Propellant for use in Cartridge, 165MM, HEP, M123A1.
MIL-P-60098 - Propellant, M6 For Use In Cartridge, Cannister 76Mm, M363
This specification covers one type of propellant designated as M6, for use in the Cartridge, Cannister, 76MM, M363 for the 76MM guns M32 and M48.
MIL-P-60354 - Propellant, M9 (For Use In M19A2 Signal)
This specification covers the M9 propellant for use in M19A2 Signal.
MIL-P-60356 - Powder, Igniter, Clean Burning (For Use In Charges, Propelling, M3A1 M4A2 And Xm119E4 For 155Mm Howitzer)
This specification covers two types of powder, clean burning igniter (CBI) for use in Charges, Propelling, M3A1 and M4A2 for 155MM Howitzer.
MIL-P-60358 - Propellant M5 For Use In Charge, Propelling, Xm178 For 90Mm Recoilless Rifle
This specification covers M5 Propellant for one type of propelling charge designated as XM178 for the 90MM Recoilless Rifle.
MIL-P-60359 - Propellant M6 For Use In Cartridge, 90Mm, Tp-T, M353
This specification covers M6 Propellant for use in Cartridge, 90MM, TP-T, M353.
A-A-3011)The slip-on cotton-yarn dusting mop covered by this specification is primarily intended for use in dusting floors.
T-M-580 - Mop, Wet, Cotton, (With Fixed Handle) (S/S By A-A-3060)
T-S-837 - Swab, Deck, (With Or Without Handle) (S/S By Fed Spec T-M-580)
UU-T-595 - Towel, Wiping, Paper. Industrial And Institutional (S/S By A-A-1432)
UU-T-598 - Towel, Paper. (Plastic-Wiping) (S/S By A-A-1447)
MIL-P-60363 - Propellant, M9 (For Use In Base Charge Assemblies)
This specification covers M9 Propellant for use in M494A4, APERS-T, Cartridge, 105mm.
MIL-P-60375 - Propellant M26 For Use In Cartridge, Anti Personnel Xm581 For 106Mm Rifle M40A1
This specification covers M26 Propellant for use in one type of Cartridge Designated as Cartridge, 106mm, APERS, XM581, for use in recoilless rifle M40A1.
MIL-P-60382 - Propellant M30 For Use In Cartridge, 90Mm, Anti Personnel, Xm580 For Guns M36 & M41
This specification covers M30 Propellant for use in one type of cartridge designated as Cartridge, 90MM, APERS, XM580.
MIL-P-60384 - Propellant M6 For Use In Charge, Propelling, (Green Bag) 175Mm M124
This specification covers M6 Propellant for use in one type of propelling change designated as 175MM, propelling charge, XM124 for Gun M113.
MIL-P-60389 - Propellant, M30 For Use In Cartridges 76Mm, Ap-T, M339 & Tp-T, M340A1
This specification covers M30 Propellant for use in Cartridges, 76MM, AP-T, M339 and TP-T, M340A1.
MIL-P-60397 - Propellant M1 For Use In Charge, Propelling, 155Mm, M4A2
This specification covers M1 Propellant for use in the M4A2 propelling charge.
MIL-P-60398 - Propellant M9, Flake (For Use In Ignition Cartridges)
This specification covers the requirements and quality assurance provisions for the manufacture and acceptance of M9 Flake propellant for use in ignition cartridges.
MIL-P-60416 - Propellant M1 For Use In Charge, Propelling, 155Mm, M3A1
This specification covers M1 Propellant for use in the M3A1 Propelling Charge.
MIL-P-60417 - Propellant M6 For Use In Cartridge, 90Mm, Apers, Xm580E1 For Guns M36 & M41
This specification covers M6 Propellant for use in one type of cartridge designated as 90MM, APERS, XM580E1.
MIL-P-60422 - Propellant M30A1 (M30E1) For Use In Charge, Propelling, 105Mm, Xm176, For Cartridge, He, Xm548 For Howitzer M101, M102 & M108
This specification covers M30A1 (M30E1) Propellant for use in one type of propelling charge designated as 105MM propelling charge XM176.
MIL-P-60432 - Propellant Powder For Use In Base Grain, Ahh
This specification contains requirements not covered by the drawings and provides quality assurance provisions for the fabrication and packing of the propellant for use in the base grain, AHH.
MIL-P-60463 - Propellant Powder (For Use In Base Grain Ogk)
This specification covers Propellant Powder, for use in Base, Grain, OGK.
MIL-P-60464 - Propellant, Xm33
MIL-P-60465 - Propellant M6 For Use In Cartridge, 90Mm, Canister, M377
This specification covers M6 Propellant for use in Cartridge, 90MM, Canister, M377.
MIL-P-60989 - Propellant, M2 For M5 Subsystem Ammunition
This specification covers one type of propellant designated as Propellant, M2 for M5 Submission Ammunition.
MIL-P-63084 - Propellant, Ball Powder For Cartridge, 105Mm, He, Xm710
This specification covers propellant for use in ammunition (See 6.1).
MIL-P-63105 - Propellant M30 For Use In Cartridge 105Mm, Apfsds-T, M735, M735A1, And Xm774
This specification covers M30 Propellant for use in the Cartridge APFSDS-T, M735, M735A1, and XM774 for the 105MM, M68 Gun.
MIL-P-63194 - Propellant, M10 For 60Mm Mortar M204 Propelling Charge
This specification covers the requirements, quality assurance provisions, and packaging of M10 Propellant for use in M204 Mortar Increments for the 60mm cartridge: HE, M720.
MIL-P-63195 - Propellant M9 For Use In Cartridge, Ignition M702
This specification covers M9 propellant for use in Ignition Cartridge M702 for 60MM mortars.
MIL-P-63301 - Propellant M30 For Use In 105 Millimeter Cartridge, Heat-T, M622
This specification covers the requirements, quality assurance provisions, and packaging of M30 Propellant for use in the 105 Millimeter cartridge Heat-T M622 for the M102/M101A1 and M204, Howitzer.
MIL-P-63341 - Propellant M31A1 For Use In Charge Propelling M188A1 For 8 -Inch Projectiles
MIL-P-63347 - Propellant Mi For Use In Charge, Propelling, Xm211
MIL-P-63387 - Propellant, M30A1 For Use In Charge, Proof, 155Mm, Pxr-6297
MIL-P-63404 - Propellant M6 For Use In Charge, Propelling, 155Mm, M119A2
This specification covers M6 Propellant for use in Propelling Charge M119A2 for M199 cannon on HOW, medium, towed: 155MM, M198 and M185 cannon on SP How, 155MM: M109A1/A2/A3.
MIL-P-63515 - Propellant M30 For Use In Cartridge 105Mm, Apfsds-T, M833
This specification covers M30 Propellant for use in the Cartridge APFSDS-T, M833 for the 105MM, M68 Gun.
MIL-P-63517 - Propellant M14 For Use In Cartridge, 105Mm Tp-T, M490A1
This specification covers the requirements, quality assurance provisions, and packaging of M14 Propellant for use in the Cartridge TP-T, M490E1 for the 105MM, M68 Gun.
MIL-P-663 - Powder, Fuze
This Military Specification covers two types of fuze powder for use in the loading of time fuzes.
MIL-P-668 - Propellant, M15 And M17 (S/S By Mil-Std-652
MIL-P-70456 - Propellant, Stick, M31A1E1 For Use In Charge Propelling M203A1
This specification covers M31A1E1 stick propellant for use in the 155MM propelling charge, M203A1 (zone 8) for the 155MM Howitzer, M198.
MIL-P-70539 - Propellant M30 For Use In Charge, Propelling, 105Mm, M200
This specification covers M30 Propellant for use in the M200 Propelling Charge.
MIL-P-70762 - Propellant, Composite, Cast, For Use In Simulator, Missile: Sagger Xm27
This specification covers requirements and quality assurance provisions for the manufacture and acceptance of composite cast propellant.
MIL-P-70818 - Propellant M43 For Use In Cartridge 105Mm, Apfsds-T, M900
This specification covers the requirements and quality acceptance provisions for manufacture and acceptance of M43 propellant.
MIL-P-70956 - Propellant, M14, For Use In Cartridge 120 Mm, Tpcsds-T, M865
This specification covers the requirements, quality assurance provisions, and packing of M14 propellant for use in the Cartridge, TPCSDS-T, M865 for the 120 mm, M256 Gun.
MIL-P-71053 - Pax-2A Explosive Composition
This specification covers the requirements and quality acceptance provisions for manufacture and acceptance of PAX-2A, a high energy pressable explosive composition.
MIL-P-71158 - Propellant, Liquid, Xm46
This specification covers the requirements, examinations and tests for the manufacture and packaging of XM46 liquid propellant.
MIL-P-81994 - Propellant For 20Mm Ammunition
This specification covers propellant for use in ammunition for the 20MM Naval Aircraft Guns, MARK 11 and MARK 12. As used in this document, the word "powder" is synonymous with "propellant."
MIL-P-85759 - Propellant Grain, Mark 93 Mod O
MIL-R-13742 - Rdx, Desensitized
This specification covers desensitized RDX intended for use as a component of Military dynamite.
MIL-R-48270 - Rdx/Kel-F Resin Molding Powder (For Use In Ammunition)
This specification covers a high-energy solid explosive composed of RDX and a polymer of trifluorochloroethylene, which acts as a binder for the RDX (see 6.3).
MIL-R-48878 - Rdx/Estane (Pbx 0280) Molding Power (For Use In Ammunition)
This specification covers a high-energy solid explosive composed of RDX and a polyurethane resin which acts as a binder and desensitizer for the RDX.
MIL-R-63419 - Rdx/Vinyl Chloride Copolymer Explosive Composition (Pbx 9407) (For Use In Ammunition)
This specification covers requirements, quality assurance provisions and packaging for the manufacture of two (2) types of high energy solid explosives composed of RDX, uniformly coated with a copolymer of trifluorochlorethylene and vinyl chloride (VC Copolymer).
A-A-3011)The slip-on cotton-yarn dusting mop covered by this specification is primarily intended for use in dusting floors.
T-M-580 - Mop, Wet, Cotton, (With Fixed Handle) (S/S By A-A-3060)
T-S-837 - Swab, Deck, (With Or Without Handle) (S/S By Fed Spec T-M-580)
UU-T-595 - Towel, Wiping, Paper. Industrial And Institutional (S/S By A-A-1432)
UU-T-598 - Towel, Paper. (Plastic-Wiping) (S/S By A-A-1447)
MIL-S-70547 - Spheroidal Propellant, M38 For Use In Propelling Charges M218, M219, And Xm220 For Cartridges, 81Mm, Smoke, M819, Illuminating M853 And Practice, Xm879 (S/S By Mil-Dtl-32275)
This specification covers the requirements and quality acceptance provisions for manufacture and acceptance of Spheroidal Propellant, M38, for use in propelling charges M218, M219, and XM220 for cartridges, 81MM, Smoke, RP, M819, Illuminating M853 and Practice, XM879.
MIL-STD-1171 - Acceptance And Description Sheets (For Propellants And Explosives)
This standard provides guidelines, and lists all mandatory information required for the preparation of propellant description sheet, propellant acceptance sheet, rocket propellant description sheet, rocket propellant acceptance sheet and description sheet for explosives, chemicals, etc.
MIL-STD-1231 - Surveillance Inspection Of Industrial Stocks Of Propellant In Storage
This standard establishes inspection procedures and techniques for annual inspection and special inspection of bulk propellant by lot in storage not scheduled for shipment, acceptance testing, or loading.
MIL-STD-2100 - Propellant, Solid, Characterization Of (Except Gun Propellant)
The purpose of this standard is to provide a compendium of standardized methods to determine the intrinsic physical, chemical and interface properties of a solid propellant or propellants proposed for use in tactical rockets, missiles, aircrew escape systems, or auxiliary devices.
MIL-STD-286 - Propellants, Solid: Sampling, Examination And Testing
This standard describes the general methods of sampling, examining, and testing solid propellants.
MIL-STD-650 - Explosive; Sampling, Inspection And Testing
This standard describes the general methods of sampling, inspecting, and testing explosives for conformance with the material requirements of the applicable explosive specification.
MIL-STD-652 - Propellants, Solid, For Cannons Requirements And Packing
This Standard covers the chemical, physical and packing requirements for cannon propellants. The ballistic requirements for the detailed propellants are covered in their detailed specifications.
MIL-T-13505 - Thread, Silk, Sewing (For Propellant Bags)
This specification covers sewing silk thread, for fabricating bags used in the assembly of cannon propellant charges.
MIL-T-339 - Tetryl (Trinitrophenylmethylnitramine)
Tetryl covered by this specification is a high explosive intended for use in ammunition.
MIL-T-46938 - Tetracene
This specification covers the requirements and quality assurance provisions for the manufacture and acceptance of tetracene (1 - (5-tetrazolyl) -4 -quanyl tetrazene hydrate) for use in priming compositions.
MIL-T-48140 - Tungsten Powder (For Pyrotechnics)
This specification covers two types of tungsten metal powders for use in pyrotechnic compositions.
MIL-T-50611 - Trinitroresorcinal (Styphnic Acid)
This specification covers trinitroresorcinol for use in the manufacture of lead styphnate.
MIL-V-50433 - Vinyl Alcohol - Acetate Resin Solution (Vaar) (For Use In Ammunition)
This Military Specification covers one type of Vinyl Alcohol Acetate Resin Solution for use as a binder in pyrotechnic compositions.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business